My ep3 CTR

[k20actr]

Hi all!
this is my civic type-r ep3:

TRANNY

-quaife torsen lsd
-jdm gears 4-5-6

SETTING

-j's racing ENGINE TORQUE DAMPER WITH STRUT TOWER BAR
-j's racing SIDE INNER BRACE
-j's racing ff roll centre
-j's racing steering tie rod
-J’s racing STRUT TOWER BAR (REAR UPPER)
-J’s racing LOWER ARM BAR (REAR)
-anti-roll from jdm civic type-r ep3
-oem shock absorber with tein s.tech springs
-inserts engine energy-super pro
-energy sway bar bushings


BRAKE

-spoon 4 pot calipers
-j's racing brake discs fcr
-goodridge brake lines front-rear
-ferodo ds 2500 pads brake

EXTERIORS
-R1R TOYO tyres 215/45/17
-OZ.Alleggerita matt black
-carbon hood j's racing

INTERIORS

-greddy guages oil pressure,oil temperature,water temperature


ENGINE

-toda headgasket 0.3mm,
-toda a2 cams
-toda valvespings
-oem retainers
-Hybrid chain tensioner
-air duct
-custom cai 3.5''(90mm)
-rbc ported
-hondata gasket
-j's racing t/b
-dcrh 4-2-1
-exhaust 70mm custom
-j's racing thermostat
-j's racing thermo switch
-j's racing Magnetic bolts gearbox-oil pan
-Samco water hoses
-buddy club racing spec condenser

Without much pushing, here an acceleration 0-200km/h
http://www.youtube.com/watch?v=DPk9o7fHoNg&feature=plcp

 

[bairdy]

Howdy and welcome :-D
Nice looking ep3

 

[k20actr]

315 hp engine
1200kg w.o.me
89X90.7
Darton sleeves
cp 12.5 cr 89mm
f22c1 crank
inline pro rods
4-1 exhaust header custom
90mm cai custom
76mm exhaust
prayoonto stage 3 cams
intake 35.5mm valves supertech 3 angle valve job
ex valves stock
ported rbc


https://www.youtube.com/watch?v=trt8z_Lq1uQ